Connect to NL_freedom ip has failed

Sup3rnova01 · 2012-05-14 19:36:23

Hi everyone

I hope that you don't mind if i write in english as to explain the problem that I have it's easier for me than do it in french but feel free to answer in french as i understand.

Anyway I installed OPN VPN but in the beginning I could only see PROXY SEETINGS,ABOUT and EXIT.
Later on I found out that I needed to copy the configuration files on the sub folders configuration wich i did and now I can see all the 4 different server options (NL_freedom ip, NL2_freedom ip, PL_freedom ip and CZ_freedom ip).

The thing is when I try to connect from the window OPEN VPN USER AUTHENTIFICATION once i put username and password it says CONNECTION TO NP_freedom ip HAS FAILED.

I already changed the password as i notice in the forum that sometimes doing it may let it work but no change has happened.

This is probably because there is not TAP WIN 32 adapters on my system as on the task bar the message says that a cable is unplugged .

I also disable that one and I tried to create a virtual one but I have the same problem as a windows opens sayng that has not passed windows logo testing to verify its compatibility with windows XP and the local area created says NETWORK CABLE UNPLUGGED, Firewalled , TAP WIN 32 ADAPTATER V9.

Could someone help me out explaining me in a simple way what to do to let it work?

Thank you

David · 2012-05-14 20:28:30

Bonsoir ...

Ceci est un site Francophone big_smile
Donc si, je vois une objection à ce que vous écriviez en anglais ! wink

Bon ... déjà, mettez nous vos log de connexion que nous puissions voir l'erreur, car là, il n'y a aucune information sur laquelle nous pouvons nous baser.

Sinon, avez-vous suivi le tutoriel pour l'installation ... sur le Site Freedom-IP, section "Aide & FAQ" ... il y a une liste des erreurs rencontrées et une vidéo pour l'installation par Système d'Exploitation.

Cordialement, David.

Sup3rnova01 · 2012-05-15 12:43:42

Bonjour David

Excuse moi si j' a écrit en anglais mais mon français est mauvais et j’ai du mal pour explique les choses un peu plus technique

Le log de connexion que vous avez demande' c'est le nom d'utilisateur?

cordialement

Angelo

David · 2012-05-15 12:49:47

Sup3rnova01 · 2012-05-15 13:19:38

Antonin · 2012-05-15 13:41:13

Sup3rnova01 · 2012-05-15 17:56:39

Hello Antonin

I don't think that is the keybord. What do i need to do with Tap adaptator to let it work?

Thank you

Angelo

Antonin · 2012-05-15 18:05:24

Sup3rnova01 · 2012-05-16 10:30:04

Hello Antonin

I re installed the program again and that's what is displayed in the window before complete the installation.

I am not sure if it's all good because regarding the tap says:

TAP INSTALL (tap0901)
Device node created. Install is complete when drivers are installed...
Updating drivers for tap0901 from J:\Program Files\OpenVPN\driver\OemWin2k.inf.
Drivers installed successfully.
tapinstall install returned: 0
tapinstall cumulative status: 0

Please let me know

Thank you

Angelo

Previous Service REMOVE (if exists)
Output folder: J:\Program Files\OpenVPN\bin
Extract: openvpn.exe... 100%
Output folder: J:\Program Files\OpenVPN\bin
Extract: openvpn-gui-1.0.3.exe... 100%
Output folder: J:\Program Files\OpenVPN\easy-rsa
Extract: openssl-1.0.0.cnf... 100%
Extract: vars.bat.sample... 100%
Extract: init-config.bat
Extract: README.txt... 100%
Extract: build-ca.bat... 100%
Extract: build-dh.bat... 100%
Extract: build-key-server.bat... 100%
Extract: build-key.bat... 100%
Extract: build-key-pkcs12.bat... 100%
Extract: clean-all.bat... 100%
Extract: index.txt.start
Extract: revoke-full.bat... 100%
Extract: serial.start
Output folder: J:\Program Files\OpenVPN\bin
Extract: openvpnserv.exe... 100%
Output folder: J:\Program Files\OpenVPN\config
Output folder: J:\Program Files\OpenVPN\sample-config
Extract: sample.ovpn... 100%
Extract: client.ovpn... 100%
Extract: server.ovpn... 100%
Create folder: J:\Program Files\OpenVPN\log
Output folder: J:\Program Files\OpenVPN\bin
Extract: libeay32.dll... 100%
Extract: ssleay32.dll... 100%
Output folder: J:\Program Files\OpenVPN\bin
Extract: openssl.exe... 100%
Output folder: J:\Program Files\OpenVPN\bin
Extract: libpkcs11-helper-1.dll... 100%
Output folder: J:\Program Files\OpenVPN\bin
Extract: lzo2.dll... 100%
Output folder: J:\Program Files\OpenVPN\bin
Extract: msvcr90.dll... 100%
Extract: Microsoft.VC90.CRT.manifest... 100%
We are running on a 32-bit system.
Output folder: J:\Program Files\OpenVPN\bin
Extract: tapinstall.exe... 100%
Output folder: J:\Program Files\OpenVPN\driver
Extract: OemWin2k.inf... 100%
Extract: tap0901.sys... 100%
Extract: tap0901.cat... 100%
Create folder: J:\Documents and Settings\All Users\Start Menu\Programs\OpenVPN
Create folder: J:\Documents and Settings\All Users\Start Menu\Programs\OpenVPN\Documentation
Create shortcut: J:\Documents and Settings\All Users\Start Menu\Programs\OpenVPN\Uninstall OpenVPN.lnk
Output folder: J:\Program Files\OpenVPN
Extract: INSTALL-win32.txt... 100%
Extract: COPYRIGHT.GPL... 100%
Extract: icon.ico... 100%
tapinstall hwids returned: 0
TAP REMOVE OLD TAP
No devices were removed.
tapinstall remove TAP0801 returned: 0
TAP INSTALL (tap0901)
Device node created. Install is complete when drivers are installed...
Updating drivers for tap0901 from J:\Program Files\OpenVPN\driver\OemWin2k.inf.
Drivers installed successfully.
tapinstall install returned: 0
tapinstall cumulative status: 0
Service INSTALL
OpenVPN Service installed.
Create folder: J:\Documents and Settings\All Users\Start Menu\Programs\OpenVPN\Utilities
Create folder: J:\Documents and Settings\All Users\Start Menu\Programs\OpenVPN\Shortcuts
Create shortcut: J:\Documents and Settings\All Users\Start Menu\Programs\OpenVPN\OpenVPN GUI.lnk
Create shortcut: J:\Documents and Settings\All Users\Desktop\OpenVPN GUI.lnk
Create shortcut: J:\Documents and Settings\All Users\Start Menu\Programs\OpenVPN\Utilities\Add a new TAP virtual ethernet adapter.lnk
Create shortcut: J:\Documents and Settings\All Users\Start Menu\Programs\OpenVPN\Utilities\Delete ALL TAP virtual ethernet adapters.lnk
Create shortcut: J:\Documents and Settings\All Users\Start Menu\Programs\OpenVPN\Shortcuts\OpenVPN configuration file directory.lnk
Create shortcut: J:\Documents and Settings\All Users\Start Menu\Programs\OpenVPN\Shortcuts\OpenVPN log file directory.lnk
Create shortcut: J:\Documents and Settings\All Users\Start Menu\Programs\OpenVPN\Shortcuts\OpenVPN Sample Configuration Files.lnk
Create shortcut: J:\Documents and Settings\All Users\Start Menu\Programs\OpenVPN\Utilities\Generate a static OpenVPN key.lnk
Created uninstaller: J:\Program Files\OpenVPN\Uninstall.exe
Completed

lortico · 2012-05-16 11:13:12

hi sup3rnova01,
try that under XP :
- utilities
- delete all tap virtual ethernet adapters
- add a new tap virtual eternet adapter
I hope that it will work, I could solve the same type of problem in the past, by making this action.
warmly
serge

David · 2012-05-16 11:22:14

Re ...

Bah ... en toute logique le TAP est convenablement installé

tapinstall remove TAP0801 returned: 0
TAP INSTALL (tap0901)
Device node created. Install is complete when drivers are installed...
Updating drivers for tap0901 from J:\Program Files\OpenVPN\driver\OemWin2k.inf.
Drivers installed successfully.
tapinstall install returned: 0
tapinstall cumulative status: 0

Maintenant il faut mettre les fichiers de configuration dans le répertoire "config" de OpenVPN et lancer "OpenVPN-GUI" en Administrateur.

Cordialement, David.

-------------------------

Re...

Well ... in any logic the TAP is suitably installed

tapinstall remove TAP0801 returned: 0
TAP INSTALL (tap0901)
Device node created. Install is complete when drivers are installed...
Updating drivers for tap0901 from J:\Program Files\OpenVPN\driver\OemWin2k.inf.
Drivers installed successfully.
tapinstall install returned: 0
tapinstall cumulative status: 0

Now it is necessary to put configuration files in "config" OpenVPN's directory and to run "OpenVPN-GUI" in Administrator.

Best Regards, David.

Antonin · 2012-05-16 11:41:32

David · 2012-05-16 11:50:55

Bien vu Antonin big_smile
Il est trop fort ce Gars là !

Sup3rnova01 · 2012-05-16 20:31:59

@ LORTICO

Hi

I did what you told me but when i try to install the virtual TAP I have a window comin up sayng:

" THE SOFTWARE YOU ARE INSTALLING FOR THIS HARDWARE TAP WIN 32 ADAPTER 9 HAS NOT PASSED WINDOW
LOGO TESTING TO VERIFY ITS COMPATIBILITY WITH WINDOWS XP"

When i did continue I do have 2 computer on the taskbar with a red cross on top , when i open it i have:
LOCAL AREA CONNECTION 9 ANETWORK CABLE IS UNPLUGGED TAP WIN 32 ADAPTER V9

So it didn't work once again

regards

angelo

Sup3rnova01 · 2012-05-16 20:41:31

@ David

hello David

I already did put the the configuration files in the CONFIG folder.

In the config folder I have:

CA.key
TA.key
CA
README
README

Also to open I use Current user (sup3rnova) as I have administartor rights so I don't think that that's the problem neither.

cordialment

Angelo

Sup3rnova01 · 2012-05-16 20:46:26

@ Antonin

Hello

Disk J is not a partition is my disk. I have not disk C and no partitions.

Windows and OPEN VPN and all my programs are All in disk J.

Please help me out

Cordialment

Angelo

Back2back · 2012-05-16 21:03:43

Hello,
Sorry for my english

Try to open the installation .exe with compatibility XP (in proprieties)

Antonin · 2012-05-16 22:00:45

Sup3rnova01 · 2012-05-17 12:33:47

Merci Antonin et merci a tout le monde pour me aider.

je viens just de ajouter le 4 option nl_freedom ip et les autres et ca marche maintenant o je crois que ca marche parce que la lumiere est vert.

Par contre sur la pages de Freedom ip il y a toujours mon ancienne ip et le message est :"Vous n'êtes pas encore protégé par Freedom-IP"

Cordialment #

Angelo

Antonin · 2012-05-17 16:16:51

Sup3rnova01 · 2012-05-22 16:14:06

Bonjour

Comme je masque mon IP? Il est toujour visible su Host IP et le message est :"Vous n'êtes pas encore protégé par Freedom-IP"

Aide moi s'il vous plait.

Angelo

Antonin · 2012-05-22 16:17:01

Sup3rnova01 · 2012-05-22 17:31:54

Hello Antonin

I tried to login with administrator rights but doesn't work and if I want to log in as administrator I do not know the password.

Do you know how to get the administrator password?

Antonin · 2012-05-22 17:55:02

hello,

Tu DOIS être administrateur de ton poste pour utiliser OpenVPN.

You MUST be an administrator. Sorry...

Sup3rnova01 · 2012-05-22 18:13:48

Antonin je suis l'administrator..et ca c'est mon pc.

Forum Freedom-IP VPN

Annonce

#1 2012-05-14 19:36:23

Connect to NL_freedom ip has failed

#2 2012-05-14 20:28:30

Re : Connect to NL_freedom ip has failed

#3 2012-05-15 12:43:42

Re : Connect to NL_freedom ip has failed

#4 2012-05-15 12:49:47

Re : Connect to NL_freedom ip has failed

#5 2012-05-15 13:19:38

Re : Connect to NL_freedom ip has failed

#6 2012-05-15 13:41:13

Re : Connect to NL_freedom ip has failed

#7 2012-05-15 17:56:39

Re : Connect to NL_freedom ip has failed

#8 2012-05-15 18:05:24

Re : Connect to NL_freedom ip has failed

#9 2012-05-16 10:30:04

Re : Connect to NL_freedom ip has failed

#10 2012-05-16 11:13:12

Re : Connect to NL_freedom ip has failed

#11 2012-05-16 11:22:14

Re : Connect to NL_freedom ip has failed

#12 2012-05-16 11:41:32

Re : Connect to NL_freedom ip has failed

#13 2012-05-16 11:50:55

Re : Connect to NL_freedom ip has failed

#14 2012-05-16 20:31:59

Re : Connect to NL_freedom ip has failed

#15 2012-05-16 20:41:31

Re : Connect to NL_freedom ip has failed

#16 2012-05-16 20:46:26

Re : Connect to NL_freedom ip has failed

#17 2012-05-16 21:03:43

Re : Connect to NL_freedom ip has failed

#18 2012-05-16 22:00:45

Re : Connect to NL_freedom ip has failed

#19 2012-05-17 12:33:47

Re : Connect to NL_freedom ip has failed

#20 2012-05-17 16:16:51

Re : Connect to NL_freedom ip has failed

#21 2012-05-22 16:14:06

Re : Connect to NL_freedom ip has failed

#22 2012-05-22 16:17:01

Re : Connect to NL_freedom ip has failed

#23 2012-05-22 17:31:54

Re : Connect to NL_freedom ip has failed

#24 2012-05-22 17:55:02

Re : Connect to NL_freedom ip has failed

#25 2012-05-22 18:13:48

Re : Connect to NL_freedom ip has failed

Pied de page des forums